Filter
Top Products
15. SET UP MODE EO1-31009
15.4 Memory Card Operation
15-36
Key Functions
Key Function
SAVE Used to save data to the memory card.
LOAD Used to load data from the memory card.
CHECK CAP. Used to check the free capacity of the memory card.
SELECT ALL Used to select all items at the same time.
Procedure
Item Procedure
Saving data onto the
memory card
1. Select the desired item(s).
2. Input the start PLU No. and touch the Start PLU area.
3. Input the end PLU No. and touch the END PLU area.
4. Touch the [SAVE] key.
NOTE: While saving, the message “Now in process of saving” is displayed.
When succeeded, “Results of saving OK” will be displayed and the saved
items are shown with blue letters. When failed, “Results of saving NG” will
be displayed and the failed items are shown with the red letters.
Loading data from the
memory card
1. Select the desired item(s).
2. Touch the [LOAD] key.
NOTE: While loading, the message “Now in process of loading” is displayed.
When succeeded, “Results of loading OK” will be displayed and the loaded
items are shown with blue letters. When failed, “Results of loading NG” will
be displayed and the failed items are shown with the red letters
Checking the memory
capacity
1. Touch the [CHECK CAP.] key.
2. The Memory Capacity Check screen will show the free capacity of the
memory card and the scale’s internal memory, and the total capacities of
the selected items.
NOTE: Before saving or loading the data, check the free memory capacity of the destination.
Memory Capacity Check screen
ATA Card Capacity area
Display the available memory Capacity of
ATA card.
LOAD
SAVE
Total memory capacity area
The total memory of the selected
items.
Scale Memory area
Display the available memory
capacit
y
of the scale.