Filter
Top Products
15. SET UP MODE
EO1-31009
15.4 Memory Card Operation
15-33
(3) Irregular Pieces
Format pattern
Pieces pattern
W1234 W12345
1 PCS. 0001 00001
12 PCS. 0012 00012
3. Others condition regarding Barcode Specification.
It will be printed only code data (C1 –C6) if error occurred.
(1) C/D (13 digits)
C/D should set to the position of end digit of 13 digits if C/D is needed.
(2) PC/D
It is accepted that PC/D is free position.
(3) Weight
W1 - W5 are used for “Weigh mode”, “Fix mode” and “By-count mode”.
In case of By-count mode, W1 – W5 will use for Pieces data.
15.4 Memory Card Operation
You can format a memory card, load or save the data to a memory card or copy information from one
memory card to another with this menu.
The following screen will appear when the [Memory card] key of the Set up menu is touched.
Procedure
Item Procedure
Save 1. Select the SLOT 0 or SLOT 1.
2. Touch [SAVE] key.
3. The Folder/File Selection screen will appear. See Section 15.4.1.
Load 1. Select the SLOT 0 or SLOT 1.
2. Touch the [LOAD] key.
3. The Folder/File Selection screen will appear. See Section 15.4.1.
SAVE key
Clear File in Scale
Memory key
LOAD key
FORMAT key
COPY key
SLOT 0 and SLOT 1 area