Filter
Top Products
98
FWD WHEELCHAIRSPROCEDURE 17
F
W
D
W
H
E
E
L
C
H
A
I
R
S
Tie Wrap A
Sensor
Cable
Sensor
Bracket
LEFT Motor
Cable
Sensor
Cable
Tie Wrap B
Battery
Box Sub-
Frame
Lego
Block
Connector
Of The
Battery
Wiring
Harness
Base Frame
Mounting
Screw
Washer
Locknut
Sensor
Sensor
Bracket
FIGURE 10 - SENSOR CABLE ASSEMBLY REPLACEMENT
Tie Wrap C
Battery Box
Sub-Frame
Base
Frame
DETAIL A
DETAIL B
DETAIL C
DETAIL D
Lego
Block
Connector
Of The
Sensor
Cable
REPLACING SUSPENSION ARM
(FIGURE 11)
1. Remove the rear shroud. Refer to REMOVING/IN-
STALLING REAR SHROUD in this procedure of the
manual.
NOTE: Seat frame and drive wheels removed for clarification purposes ONLY.
REAR OF
CHAIR
FRONT OF
CHAIR
2. Remove the counterweight. Refer to
REMOVING/IN-
STALLING COUNTERWEIGHT in this procedure of
the manual.
16. Reinstall the counterweight. Refer to
REMOVING/IN-
STALLING COUNTERWEIGHT in this procedure of
the manual.
17. Reinstall the rear shroud. Refer to
REMOVING/IN-
STALLING REAR SHROUD in this procedure of the
manual.
14. Secure the NEW sensor cable to the sensor bracket
with a NEW tie wrap (DETAIL A).
15. Reinstall the battery boxes. Refer to INSTALLING/
REMOVING GROUP 24 BATTERY BOXES in PRO-
CEDURE 9 of this manual.