Filter
Top Products
30
6. Perform the instructions outlined in
PREPARATIONS
FOR REMOVING/INSTALLING SEAT FRAME (STAN-
DARD FRAME, ADJUSTABLE FRAME, AND CAP-
TAINS VAN SEAT) in this procedure of the manual.
CONVERTING FROM ADJUSTABLE
SEAT FRAME TO CAPTAINS VAN
SEAT OR VICE VERSA
1. Perform the instructions outlined in PREPARATIONS
FOR REMOVING/INSTALLING SEAT FRAME (STAN-
DARD FRAME, ADJUSTABLE FRAME, AND CAP-
TAINS VAN SEAT) in this procedure of the manual.
2. Perform one (1) of the following:
A. Remove the adjustable seat frame subassembly.
Refer to
REMOVING/INSTALLING STANDARD
SEAT FRAME SUBASSEMBLY in this procedure
of the manual.
B. Remove the captains van seat Assembly. Refer to
INSTALLING/REMOVING CAPTAINS VAN SEAT
ASSEMBLY in this procedure of the manual.
3. Perform one (1) of the following sections:
Adjustable Frames
A. Install the adjustable seat frame subassembly. Re-
fer to
INSTALLING/REMOVING ADJUSTABLE
SEAT FRAME SUBASSEMBLY AND/OR COM-
PONENT REPLACEMENT in this procedure of
the manual.
B. Adjust side frames to desired seat width. Refer to
CHANGING SEAT WIDTH in this procedure of the
manual for mounting hole locations and allowable
seat width/seat depth combinations.
C. 12-15-INCH SEAT DEPTHS ONLY: Install the CJ
back brackets, seat positioning strap, and quick re-
lease pin from the onto the adjustable seat frame.
Refer to
REMOVING/INSTALLING CJ BACK
BRACKETS in PROCEDURE 8 of this manual.
D. Perform the instructions outlined in
PREPARA-
TIONS FOR REMOVING/INSTALLING SEAT
FRAME (STANDARD FRAME, ADJUSTABLE
FRAME, AND CAPTAINS VAN SEAT) in this proce-
dure of the manual.
Captains Van Seat
A. Install the captains van seat. Refer to
INSTALLING/
REMOVING CAPTAINS VAN SEAT ASSEMBLY in
this procedure of the manual.
B. Adjust the captains van seat to the desired position.
Refer to
ADJUSTING CAPTAINS VAN SEAT in this
procedure of the manual.
3. Remove the four (4) mounting screws, two (2) wash-
ers, and two (2) spacers that secure the captains van
seat to the seat frame.
4. Replace the captains van seat or the seat frame.
5. Secure new/existing captains van seat to the new/exist-
ing captains van seat frame with existing four (4) mount-
ing screws and spacers. Torque to 75- inch pounds.
6. Install new captains van seat assembly onto the wheel-
chair. Refer to
INSTALLING/REMOVING CAPTAINS VAN
SEAT ASSEMBLY in this procedure of the manual.
7. Perform the instructions outlined in
PREPARATIONS
FOR REMOVING/INSTALLING SEAT FRAME (STAN-
DARD FRAME, ADJUSTABLE FRAME, AND CAP-
TAINS VAN SEAT) in this procedure of the manual.
CONVERTING FROM STANDARD
SEAT FRAME TO ADJUSTABLE
SEAT FRAME OR VICE VERSA
1. Perform the instructions outlined in PREPARATIONS
FOR REMOVING/INSTALLING SEAT FRAME (STAN-
DARD FRAME, ADJUSTABLE FRAME, AND CAP-
TAINS VAN SEAT) in this procedure of the manual.
2. Perform one (1) of the following:
A. Remove the existing standard seat frame subas-
sembly. Refer to
REMOVING/INSTALLING STAN-
DARD SEAT FRAME SUBASSEMBLY in this pro-
cedure of the manual.
B. Remove the adjustable seat frame subassembly.
Refer to
REMOVING/INSTALLING ADJUSTABLE
SEAT FRAME SUBASSEMBLY AND/OR COM-
PONENT REPLACEMENT in this procedure of the
manual.
3. Perform one (1) of the following:
A. Install the standard frame subassembly. Refer to
INSTALLING/REMOVING STANDARD SEAT
FRAME SUBASSEMBLY in this procedure of the
manual.
B. Install the adjustable seat frame subassembly. Re-
fer to
INSTALLING/REMOVING ADJUSTABLE
SEAT FRAME SUBASSEMBLY AND/OR COM-
PONENT REPLACEMENT in this procedure of
the manual.
4. ADJUSTABLE FRAMES ONLY: Adjust side frame to
desired seat width. Refer to
CHANGING SEAT WIDTH
in this procedure of the manual for mounting hole loca-
tions and allowable seat width/seat depth combinations.
5. STANDARD AND ADJUSTABLE FRAME WITH 12-
15-INCH SEAT DEPTHS ONLY: Remove the CJ back
brackets from the existing standard seat frame and in-
stall onto the NEW standard seat frame. Refer to
RE-
MOVING/INSTALLING CJ BACK BRACKETS in PRO-
CEDURE 8 of this manual.
PROCEDURE 6 SEAT FRAME
S
E
A
T
F
R
A
M
E