Filter
Top Products
Storing and Loading Controller Configurations
10-3
4. To save the parameter set in a .PRF file, click on Save As. The Save Parameter Set
window will open. Use it to enter a filename (with a .PRF file extension) and to
specify a destination directory. (To save the parameter set to a file with the same
name as the controller, click on Save. The file will be saved in the same directory
where the CN8-SW software was installed.)
5. As the save progresses, a status window will be displayed. When the status window
closes, the save operation is complete. You can click on OK to close the parameter
window.