Filter
Top Products
CN8-SWÔ UserÕs Guide
3-4
3.3 Logging In to CN8-SW Using the Default Account
When you start the CN8-SW application, the Operator Login Window will be displayed.
By default, newly installed CN8-SW software will be set up to recognize one login
account. This is user ÒMULTIÓ. The password is ÒCOMMÓ.
To log in:
1. Start the CN8-SW application.
2. Select File | Login. The Operator Login window will be displayed.
3. Click on the User Id text entry box and type in MULTI. CN8-SW user names and
passwords are case-sensitive. This means that capitalization matters. To the
software ÒMULTIÓ, ÒmultiÓ, and ÒMultiÓ are all different names.
4. Tab to the Password entry box or click on it. Type in COMM.
5. Click on OK. The CN8-SW window will open. Because the software was newly
installed, the main display will be blank. In the future, once communication has been
established with controllers, and the controller identities saved as a CN8-SW system
file, logging in will result in the display of the controllers in the most recently used
.MCS file.