Filter
Top Products
Configuring and Running Ramp and Soak Recipes
9-5
9.3 Running CN8-SW Recipes
9.3.1 Starting to Run a Recipe
To run a CN8-SW Ramp/Soak recipe:
1. While logged in as MULTI (or another user with View/Change Parameter privileges),
select Ramp/Soak | Run. The Open Recipe window will open.
2. Select the .rcp file to be run and click on OK. The Run Recipe Controller Selection
window will open.
3. This window lists the name and network address of every control not currently
executing a recipe under the direction of the CN8-SW system. Select one or more
controllers. (You can hold down the Shift key to select multiple controllers that are
together on the list, or hold down the Control key to select multiple controllers that are
scattered on the list.)
4. Click on OK. The Run Recipe Controller Selection window will close, and the CN8-
SW system will begin running the recipe on the selected controller(s). On the CN8-
SW main display, the PV of any controller running the recipe will alternate with the
display of Òr-SÓ.