Filter
Top Products
CN8-SWÔ UserÕs Guide
1-10
O p t i o n s M e n u
F u n c t i o n P u r p o s e S e c t i o n
Communications
Access the window used to specify PC port and
communication parameters to be used by the CN8-SW
software. These parameters will override (but not
change) the communication settings in your operating
system for the selected port.
4.4
Logging
[Stop Logging]
Access the window used to specify the time interval at
which PV and SP for all controllers should be written to a
log file, name the file, and turn on logging. When logging
is active, this menu item becomes Stop Logging.
11
Start Find Controllers
[Stop Find
Controllers]
Start the process used by the CN8-SW software to poll
each possible address on the network to see if there is a
controller at that address. When this process is active,
this menu item becomes Stop Find Controllers. The
alternative to using this automatic process to enable the
CN8-SW computer to recognize controllers is to recognize
controllers one at a time using the Controller menu Add
function.
4.4.2
R a m p / S o a k M e n u
F u n c t i o n P u r p o s e
S e c t i o n
New Access the window used to begin the process of
configuring a new ramp and soak recipe to be executed
under the direction of CN8-SW.
9.2.1
Edit
Access the window used to select an existing recipe (on
any accessible drive) for edit.
9.2.2
Run Access the window used to select an existing recipe to
run on one or more controllers.
9.3.1
Hold
Access the window used to hold (pause) execution of an
active (running) recipe on one or more controllers. While
a controller is in hold, its setpoint will not be changed.
9.3.2
Resume
Access the window used to resume (continue) execution
of a ÒheldÓ recipe in one or more controllers.
9.3.3
Stop Access the window used to stop (terminate) the execution
of an active or ÒheldÓ recipe in one or more controllers.
9.3.3
H e l p M e n u
F u n c t i o n P u r p o s e
S e c t i o n
About CN8-SW
Access CN8-SW version information. If you phone for
technical support, be ready to supply this number.
--