Filter
Top Products
40 F300S/F300SQ Ultraviolet Lamp System
Interconnect Cables
The F300S/F300SQ interconnect cables and connector contact kits are listed in
Appendix B, “Cables and Connectors”. See this list for the available varieties and
lengths.
Connection and Program Log
To facilitate operation and maintenance, it is advisable to keep a record of the
input/output connections and programming used on each unit. A blank log form is
included in Appendix D, “Lamp System Maintenance Log” of this manual.
Installing the External Interlocks Control
An input has been made available for use as an external interlock control. When
activated, this circuit will cause the system to shut down. (See Chapter 5,
“Troubleshooting” for details.)
User Connections
Pin removal and crimping tools are required to complete the optional user input/output
connections to P105A and P106. Make these connections as described next.
Figure 9. P300M/P300MQ Power Supply Rear Panel
J105B J107
INTERLOCKS
DISCONNECT POWER
BEFORE SERVICING
BUS INPUT
BUS OUTPUTRELAYS
(K1-K5)
IRRADIATOR
BLOWER CABLE
HIGH VOLTAGE CABLE
J104
J101
J105A
J106
J103