Filter
Top Products
22 F300S/F300SQ Ultraviolet Lamp System
NOTE: Any repairs or alterations, including the use of non-Fusion UV
Systems (Fusion) parts, made by the user of this product without Fusion
UV Systems’ prior written consent shall void all warranties provided by
Fusion UV Systems and such warranties shall cease to be in effect. No
allowance will be granted for such repairs or alterations. No person,
agent, representative, or distributor is authorized to give any warranties
on behalf of Fusion UV Systems, or to accept for Fusion UV Systems any
other liability in connection with any of Fusion UV Systems’ products.
Shipping Instructions
Read the following sections carefully to ensure compliance with the requirements and
recommendations for returning products or components, whether for credit,
replacement, or repairs.
Returned Material Authorization Number
Equipment may not be returned, whether for warranty or other purposes, without prior
authorization and issuance by Fusion UV Systems of a Returned Material
Authorization Number. After inspection and acceptance, equipment returned for credit
will be subject to a handling and restocking charge. Returned equipment must be
shipped prepaid.
General Packing Instructions
If possible, original packaging materials should be reused for return shipment to
Fusion UV Systems. If Fusion UV Systems’ packaging materials are not used,
equivalent packaging, as outlined in the following sections, is to be used.
Power Supply
Secure the chassis to the cover by M5 x 12 mm screws. (There are three on each side
of power supply for the P300M/P300MQ, two on each side of power supply for the
P300MT.)
Box: Bursting Test: 24 kg/cm
2
(350 lbs./sq. in.)
Gross Weight Limit: 70 kg (155 lbs.)
Fills: Rigid high density styrofoam or cardboard fills as required to
ensure power supply does not shift in box during shipment.
CAUTION: Packaging materials should not push against connectors or
controls.