Filter
Top Products
Installation, Operation, and Maintenance Manual # 509252 Rev R 21
Figure 4. P300M Front Panel
Warranty Policy
Items manufactured by Fusion UV Systems Incorporated are warranted (under normal
and proper use) to be free from defects in material and workmanship. Fusion UV
Systems will repair or replace, at its option, any defective parts when returned to
Fusion by the purchaser, transportation paid. See the Terms & Conditions included
with your sales order for the length of the warranty period.
Equipment may not be returned, whether for warranty or other purposes, without prior
authorization and issuance of a Returned Material Authorization Number by Fusion
UV Systems. After inspection and acceptance, equipment returned for credit will be
subject to a handling and restocking charge.
Fusion UV Systems assumes no expense or liability for repairs made outside its plant
without written consent nor for any labor costs which are so incurred. For equipment
manufactured by others, Fusion UV Systems will pass along to the purchaser whatever
warranty it receives and will not be responsible for any incurred expense outside of
such warranty.
If repair of equipment is required but return of such equipment to Fusion UV Systems
is not feasible, then by mutual consent of Fusion and the purchaser, an authorized
Fusion UV service representative will be sent to the purchaser’s plant to effect
necessary repairs. The purchaser will be charged for the representative’s time and
expense.
The two consumable items in a Fusion UV lamp system are the lamp bulb and the
microwave power tube (magnetron). The special warranties on these components are
detailed on the sales contract.