Filter
Top Products
To set the Active insulin time, do the following steps:
1
ಘ
Make sure the EDIT SETTINGS screen is open.
Main > Bolus > Bolus Wizard Setup > Edit Settings
2
ಘ
Select Active Ins Time, then press ACT.
3
ಘ
The ACTIVE INS TIME screen appears. The default time of six hours flashes on the screen.
4
ಘ
Set the number of hours for the active insulin time, then press ACT.
5
ಘ
The EDIT SETTINGS screen shows the new Active insulin time setting. You have now completed the Bolus Wizard
setup. Press ESC or wait to see the message: Bolus Wizard setup is complete.
Review your Bolus Wizard feature settings
Check your Bolus Wizard feature settings in the REVIEW SETTINGS screen. If necessary, compare this information
with your information in the Bolus Wizard feature settings table.
1
ಘ
Go to the REVIEW SETTINGS screen.
Main > Bolus > Bolus Wizard Setup > Review Settings
2
ಘ
Scroll through the text to view your Bolus Wizard settings.
3
ಘ
Exit the menus when you are done.
Meter option
You can set up your pump to automatically receive
your blood glucose reading from the linked meter.
This meter may not be available in all countries.
Check with your local Medtronic Diabetes
representative. Your pump is set at the factory with
the meter option turned off. Programming your meter ID links your pump to the meter. If you do not link the meter
to your pump, you will enter your blood glucose readings manually. Each meter has its own unique ID. You can link
up to three meters to your pump.
When the pump is idle (at the HOME screen), it will beep or vibrate when it receives a blood glucose reading from
the meter. The reading will appear on the pump screen.
NOTE: The use of RF (radio frequency) devices with the pump reduces pump battery life.
ಘ
Meter
BG readings
Using the Bolus Wizard feature 77