Filter
Top Products
How to program the Bolus Wizard feature
You need your personal settings from the Bolus Wizard feature settings table to setup the Bolus Wizard feature.
Your Bolus Wizard feature settings are programmed in the EDIT SETTINGS screen.
0DLQ!%ROXV!%ROXV:L]DUG6HWXS!(GLW6HWWLQJV
Once the settings are programmed, you do not have to program them again unless the values change. After you
program one setting, the screen will automatically go to the next required setting. After you program all your
settings, review them as described in this section to make sure they are set correctly.
Instructions for programming the Bolus Wizard feature settings are in the next paragraphs. Program your settings
in the order described to make sure you program all the settings. If you have not completed setting up all of the
required settings, MISSING INFO screen appears. It lists the required settings for this feature. You must program the
listed settings before you can use the Bolus Wizard feature.
Turning on the Bolus Wizard feature
1
ಘ
Go to the EDIT SETTINGS screen.
Main > Bolus > Bolus Wizard Setup > Edit Settings
2
ಘ
The EDIT SETTINGS screen appears with Wizard: Off selected. Press ACT.
3
ಘ
The WIZARD ON/OFF screen appears. Select On, then press ACT.
4
ಘ
The EDIT SETTINGS screen appears, showing that the wizard is now turned on. You are now ready to select your
carb units.
Selecting the Carb units
The carb unit setting lets the pump know which way to count your carbohydrates (grams or exchanges). Any time
you make changes to the carb units, you must also reprogram the carb ratios. Refer to the Bolus Wizard feature
settings table in this chapter for your carb ratio settings.
1
ಘ
Make sure the EDIT SETTINGS screen is open.
Main > Bolus > Bolus Wizard Setup > Edit Settings
2
ಘ
Select Carb Units, then press ACT.
3
ಘ
The CARB UNITS screen appears. Select Grams or Exchanges, then press ACT.
4
ಘ
The EDIT SETTINGS screen shows the carb units you selected. You are now ready to set your carb/exchange
ratios.
72 Using the Bolus Wizard feature