Filter
Top Products
Screen backlight
When you press from the HOME screen, the light on the screen turns on or off. During programming, the backlight
can be turned on by pressing the
and the together. The light will stay on while you are pressing any of the
pump buttons. It will stay on as long as the current screen is active.
To conserve your battery, the backlight will turn off automatically while the pump is vibrating. After the vibration
is finished, the light will turn back on. The backlight cannot be turned on in a Low Battery condition.
Beep/vibrate
Your pump will beep or vibrate to indicate activity. Refer to the Setting your alert type section in the Utilities
chapter for setup instructions.
Operating modes
The screen lets you know when a special feature is active or if there is a condition that needs your attention. The
active features and pump status will determine the operating mode. The screens for the three modes are shown
below.
Normal mode
Mode for standard pump operations for normal basal and bolus delivery. No
special features are active (i.e., basal patterns, temp basal, etc.). No alarms
and no alerts exist.
Special mode
Indicates a special feature is active or an alert condition(s) exists. Special mode
does not restrict any of the pump functions. When the pump is in Special mode,
an open circle appears at the top of the screen and it will beep/vibrate
periodically to remind you of the condition. The conditions and features that
will put the pump in Special mode are:
• Low Reservoir condition
• Low Battery condition
The basics 31