Filter
Top Products
3
ಘ
Press ACT again to lock the keypad. The KEYPAD LOCKED screen appears with instructions on how to unlock
the keypad.
Unlocking the keypad
Press the button and the button at the same time. Keypad Unlocked screen appears.
Selftest
Selftest is a safety utility that allows you to check if your pump is operating properly. This self-diagnostic feature
can be used for maintenance or to check your pump if it operates unusually. During selftest, your pump will
automatically run internal tests, including a check for proper operation of the beep and vibrate modes. The selftest
is additional to the routine tests that run independently while the pump operates.
Contact our 24 Hour HelpLine if any of the tests do not occur as described here.
NOTE: If the pump detects a condition such as low battery, the selftest will not finish. A message will appear
to show the condition that caused the test to stop.
ಘ
1
ಘ
Go to the UTILITIES MENU.
Main > Utilities > Selftest
2
ಘ
Select Selftest, then press ACT.
3
ಘ
Periodically, you will hear beeps as different mechanisms in the pump are being tested. As part of the selftest,
the pump will do these tests:
a. Screen Test:
The screen will appear all black.
b. Selftest:
The pump will count down from 10.
c. Tone Test:
You should hear beeps.
d. Vibrate Test:
You will feel vibrations.
4
ಘ
After the selftest is finished, TEST COMPLETE screen appears. The screen will return to the UTILITIES MENU,
then to the HOME screen.
116 Utilities