Filter
Top Products
5 While still holding the
plunger rod, flip the vial
over so the vial is up, slowly
pull down on the plunger to
fill the reservoir.
6 Gently tap the side of the reservoir to
make any air bubbles rise to the top of the
reservoir.
7 Slowly push up on the plunger just
enough to remove any air bubbles
from the reservoir.
8 Slowly pull down on the plunger
to fill the reservoir to the number of
units desired.
9 With the vial down, hold the transfer guard. Turn
the reservoir counter-clockwise, then pull straight up
to remove it from the transfer guard.
10 Place the tubing connector onto the reservoir.
Turn the connector clockwise, pressing gently against
the reservoir until you feel it slide in. Push in and con-
tinue turning until the reservoir and the connector lock
with a click.
“Click”
Starting on insulin 55