Filter
Top Products
Utilities
8
Alarm review
You can review alarms in the ALARM HISTORY screen. This screen shows up to 36 past alarms and/or errors. You
can also review the details for each alarm when you are in the ALARM HISTORY screen.
1
ಘ
Go to the ALARM HISTORY screen.
Main > Utilities > Alarm > Alarm History
2
ಘ
Scroll through your past alarms.
3
ಘ
In the ALARM HISTORY screen, select the alarm you want to review and press ACT. The details for that alarm
will appear on the screen.
4
ಘ
Press ESC to return to the ALARM HISTORY screen. Select another alarm to review, or exit the menus if you are
done.
Setting your alert type
You can select the type of alert your pump uses (for alarms, special conditions and programming). You can select
a vibrate (silent) alert, or an audible beep alert. There are three beep types: long, medium and short tones. The
factory setting for this feature is beep-medium.
The vibrate alert type is disabled if you use the block feature, and vibrate must be set again once block is turned
off. Vibrate uses more battery power than the beep alert type and may shorten battery life. If your alert type is
set to vibrate and you get a LOW BATTERY alert, your pump will use the beep alert type instead to conserve battery
power.
1
ಘ
Go to the ALERT TYPE screen.
Main > Utilities > Alarm > Alert Type
2
ಘ
Select your alert type and press ACT. That alert type is now active. Exit the menus.
Utilities 107