Filter
Top Products
Pelco Manual C1977M-D (6/02) [ 9 ]
OVERVIEW
NOTE:
This manual refers to the PelcoNet Transmission System
unit when discussing features, functions,
or specifications that apply to both transmitter and receiver models. “Receiver,” as used in this manual refers
to a PelcoNet Transmission System
receiver unless otherwise noted.
Description
The PelcoNet Transmission System lets you transmit and receive live video, audio, and data over existing
Ethernet computer networks (either intranet or Internet) using the TCP/IP protocol. You can view the
picture on a CCTV or PC monitor.
The PelcoNet Transmission System consists of two units: a transmitter (NET101T/NET101T-A) and a
receiver (NET101R/NET101R-A)—however, only the transmitter is required to use the PelcoNet Trans-
mission System. The transmitter connects any NTSC or PAL video source (cameras, for example) to the
computer network.
Depending on how you want to display the video, you can use just a transmitter or a transmitter and a
receiver. There are two ways to display remote video:
•A hardware receiver and attached standard NTSC or PAL monitor
•Web browser using any PC on the network to display the video
Transmitters and receivers are identified by IP addresses, just like any other equipment connected to a
computer network.
There is a bi-directional serial interface for remote control of peripherals like PTZ cameras. Transmission
of full duplex audio is an option.
Software Version
This manual documents PelcoNet software version 5.24.
Package Contents
The product package contains the following items:
•Transmitter (NET101T/NET101T-A) or receiver (NET101R/NET101R-A)
• AC plug power adapter, 5 VDC output
•CD
Keep the carton, including the original packaging material, to repack the equipment if you need to return it
for repair.