Filter
Top Products
[ 52 ] Pelco Manual C1977M-D (6/02)
Controlling The Display
The live video control pages include representations of keys that let you control various functions (in
addition to showing the camera display). Use the mouse pointer and click the left mouse button to enable
options and operate controls on the screen. Click outside the options to disable a radio button or
selection button.
Live video pages let you choose the size of the video viewing area. Click either 352x288 (small) or
704x576 (large) in the Resize Video field.
Live video pages also let you record and play back camera views on a PC’s hard drive. Refer to the
Record and Play Back the Display on a PC
section for details.
On the Spectra and Esprit live video control pages, you can control the following:
• Presets–To program a preset: position the camera, click the Set checkbox, and click a preset number
button.
To activate a preset: click a preset number button.
• Patterns–You can program only one pattern through PelcoNet. To program a pattern: click the Set
checkbox, then click Start., and use the arrow buttons to position the camera. Click Stop to halt
pattern programming.
To operate a pattern: click Start to begin the pattern and Stop to halt.
• Programming Menus–To access the programming menus: click the Set checkbox, and click the 95
button. Use the camera arrow keys to move up/down the menus. Use the open iris icon to open
menus and set options. Use the open iris icon in conjunction with the Exit option to move backward
through menu layers and to exit programming mode.
NOTE:
If you installed Internet Explorer from the PelcoNet Transmission System CD, ActiveX is already
installed. Otherwise, you must install ActiveX before you can view the video. Refer to the
Instructions For
The Network Administrator
section.