Filter
Top Products
Pelco Manual C1977M-D (6/02) [ 29 ]
Table A. Terminal Command Reference (continued)
vDisplay version information.
>HW version: <version number> SW version: <version
number>
bDisplays the current transmission data rate. The display is updated continuously.
Configuration Using A Web Browser
In addition to the aforementioned configuration using a terminal program, which only covers the most
basic settings, a web browser is the tool of choice for a more complete configuration. To accomplish this,
the system features a complete HTTP server.
Microsoft
®
’s Internet Explorer 5.x is the recommended browser.
Web Server Concept
Start your web browser and connect to the URL http://IP-Address, where IP-Address is the IP address of
the unit you want to configure. Use the standard dot-separated format (x.x.x.x) to enter the address.
The HTTP server provides five separate pages for configuration.
You can return to the home page from any other page by clicking on the PelcoNet logo on the left side.
Clicking on the Pelco
®
logo while on the home page immediately transfers you to the Pelco Internet home
page, provided the network allows for Internet access.