Filter
Top Products
63
SETTINGS
You will hear a three–tone beep when
OFF
is displayed. Press the blue power button to
move to the 14– and 30–day
test averages setting.
14– and 30–Day Test Averages
For accurate 14–day and 30–day blood
glucose averages, you must mark control
solution test results by pressing the green
C button again while the glucose level is
displayed. This will keep them from being
included in your blood glucose test averages.
If you wish to turn the
averages off, press the green
button. The following display
will appear:
No averages will be displayed
in memory mode. Press the
blue power button to move to
the time format setting.
The meter is preset to
display 14–day and 30–day
averages of your blood
glucose results in memory
mode.
To operate without beep sig-
nals, press the green C but-
ton. The following display
will appear.
In set–up mode, a
three–tone beep sounds and
the following symbol flashes
when you move to the beep
signals feature.
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 63