Filter
Top Products
TESTING
(Example)
Make sure a test strip is not in the meter
when you turn it on.
Next, the code number appears.
7. Compare the code number on the meter
display with the code number on the test
strip vial. If they do not
match, press the green
C button until the
codes match.
These two symbols will
alternate on the display. The meter is
now ready to perform a test. The meter
will turn off automatically after 2 minutes
if a test strip is not inserted.
Apply blood to Insert test strip
test strip into meter
26
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 26