Filter
Top Products
SETTINGS
60
Setting the Time
To set the time, enter the set-up mode as
described in “Entering Set-Up Mode” above.
The time appears with the hour flashing.
Press and release the green C button to
advance 1 hour. To move faster, hold down
the green C button. With the correct hour on
the display, press and release the blue power
button and the minutes will start flashing.
Press and release the green C button to
advance 1 minute. To move faster, hold the
green C button down. With the correct min-
utes on the display, press the blue power
button and the year setting will appear on
the display.
Note: Calculated 14–day and 30–day aver-
ages may change if you change the date
and time. The averages are calculated from
glucose results measured during the 14 or
30 days preceding the current date and time
settings.
Setting the Year
With the year on the display, press and
release the green C button to advance 1
year. To move faster, hold down the green C
button. With the correct year on the display,
press and release the blue power button
and the month and day will appear on the
screen with the month segment flashing
(month/day format is preset).
AM
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 60