Filter
Top Products
MAINTENANCE
44
Note: If you disinfected the meter
with a 10% bleach solution, you may
not have completely removed the
bleach residue from the grey area
inside the test strip holder cover. Wipe
this area with a cloth dampened with
water and dry thoroughly. Failure to
remove the excess bleach may result in
an error message
(, )
or an
inaccurately high result.
Note: Clean the outside of the
meter by gently wiping it with a cloth
dampened with water. Dry it with a
soft cloth.
6. If the Er 5 symbol
appears after cleaning,
check to see if you
inserted the test strip
holder completely and
securely (see step 4 in
this section).
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 44