Lifescan SPD2410BD Blood Glucose Meter User Manual


 
33
TESTING
than the “19.4 mmol/L” sample colour
dot, your glucose level is very high.
CAUTION: The Sample colour dots are
only approximate. They should be
used only as a guide in the event you
get an error message instead of a
numerical result. They can give you an
indication of whether your glucose is
very low 2.8 mmol/L (50 mg/dL) or
very high 19.4 mmol/L (350 mg/dL)
while you troubleshoot the error mes-
sage. Results obtained using the
sample colour dots are not a replace-
ment for a OneTouch
®
SureStep
®
meter test result. Do not use Colour
Chart to verify control solution tests.
13. Record your test result in your logbook.
If a test result falls outside of the target
range that you and your Healthcare
Professional have established and you
cannot link it to diet, exercise, medica-
tion, or stress, repeat the test.
14. Remove and discard the test strip.
15. Turn off the meter by pressing the blue
power button. The meter automatically
turns off 3 minutes after it displays your
test result.
16. Remove the lancing device cap.
Removing Lancing Device Cap
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 33