Filter
Top Products
17
CHECKING
NOTE: If opening the test strip vial for
the first time, write the discard date
(4 months from today) on the vial label
and perform a control solution test fol-
lowing the instructions below.
4. Shake the control solution vial. Apply 1
drop of control solution to the centre of
the pink test square.
◆
The first time you open the control
solution vial, write the discard date on
the label in the space provided. The
discard date for control solution is 3
months from the date you first open
the vial.
◆
Check expiration date and discard
date. Do not use the control solution
after these dates.
◆
If the entire white pad surrounding the
pink test square is soaked, you have
applied too much Glucose Control
Solution.
CAUTION: Applying too much control
solution may cause out–of–range results
and may make the meter dirty.
DCO_05090602A_OTSS_OB_CA_ENG 12/3/03 1:27 PM Page 17