Filter
Top Products
Terminator SS 6 Part No. 1052712 Rev D
Section 1 - General Guidelines - includes the following:
Stability
Operating Information
Tire Pressure and Information
Weight Training
Weight Limitation
Safety/Handling of Wheelchairs
GENERAL GUIDELINESSECTION 1
GENERAL GUIDELINES
STABILITYSTABILITY
STABILITYSTABILITY
STABILITY
STABILITY WARNING
The position of the footrest, camber tube, back angle, the tautness of the back
upholstery as well as the user's condition are directly related to the wheelchair's
stability. Any change to one (1) or any combination of the five (5) may cause the
wheelchair to decrease in stability. Use EXTREME caution when using a new
seating position. The addition of anti-tippers may be required .
NOTE: When changes to the left hand column occur, follow across the chart and refer to the
procedure to maintain the proper stability, safety and handling of the wheel chair.
OPERATING INFORMATION
WARNING
To determine and establish your particular safety limits, practice bending,
reaching and transferring activities in several combinations in the presence of a
qualified healthcare professional BEFORE attempting active use of the wheelchair.
DO NOT attempt to reach objects if you have to move forward in the seat.
DO NOT attempt to reach objects if you have to pick them up from the
floor by reaching down between your knees.
DO NOT lean over the top of the back upholstery to reach objects from
behind as this may cause the wheelchair to tip over.
DO NOT shift your weight or sitting position toward the direction you
are reaching as the wheelchair may tip over.
Footrest Position
Camber Tube
Back Angle
Back Upholstery
User Condition
Footrest Position
Camber Tube
Back Angle
Back Upholstery
User Condition