Filter
Top Products
Terminator SS 26 Part No. 1052712 Rev D
WHEELSSECTION 5
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely - otherwise injury or damage
may result.
REMOVING/INSTALLING REAR WHEELS (FIGURE 1)
CAUTION
Changing the size of the rear wheels can affect the performance of the
wheelchair. Contact Invacare at the telephone numbers on the back of
this manual BEFORE changing rear wheel size.
1. Perform one (1) of the following:
QUICK-RELEASE - Push in the tip of the quick-release axle and pull axle and
wheel away from the wheelchair.
QUAD-RELEASE - Lift UP on the handle of the quad-release axle and pull axle
and wheel away from the wheelchair.
2. Repeat STEP 1 for the opposite rear wheel.
3. Reinstall the rear wheels onto the wheelchair by reversing STEPS 1-2.
Section 5 - Wheels - includes the following:
Removing/Installing Rear Wheels
Adjusting Quick-Release Axles
Installing Quad-Release Axles
Adjusting Quad-Release Handles
Handrim Replacement
Repairing/Replacing Rear Wheel, Tire/Tube
Opening/Closing Clamps
Adjusting Rear Wheel Camber
Determining Toe in/Toe out
Adjusting Toe in/Toe out
Adjusting Wheelbase Length (Adjusting Center of Gravity)
Adjusting Wheelbase Width
Replacing Axle Tube
Adjusting the Axle Tube
Replacing Adjusting Casters
Adjusting Front Caster Height
Wheel Lock Adjustment/Replacement
WHEELS