Filter
Top Products
Terminator SS 22 Part No. 1052712 Rev D
WARNING
After the adjustable tension back upholstery has been positioned to the
end-users individual needs, the fastening straps MUST be securely
fastened BEFORE applying the back upholstery cover. The adjustable
back should be checked whenever entering the wheelchair to ensure that
the fastening straps are securely fastened.
9. Secure the back upholstery cover (fastening strap) to the back of the adjustable back
upholstery (fastening strap).
10. Flip the back upholstery cover over the adjustable back upholstery and secure the
fastening straps to the front of the adjustable back upholstery.
11. Lay the front portion of the back upholstery cover on the seat pan.
12. Adjust the slack in the back upholstery cover and then secure to the seat pan fasten-
ing straps.
BACKSECTION 3
Fastening Strap
Back Upholstery Cover
Fastening Straps
Back
Cane
Upper
Grommet
Hole
Back Upholstery Adjuster Strap Section
Back Upholstery
Anchor Loop Section
FIGURE 4 - ADJUSTING/REPLACING BACK UPHOLSTERY - CUSTOM
MANUAL ADJUSTABLE TENSION BACK UPHOLSTERY
Mounting Screw
Adjuster Strap
Anchor
Loop
Back Cane
Back Height
Adjustment Screw
Back
Upright
BACK