Filter
Top Products
1. MAIN ALARM PANEL
1-9
The table on the next page shows the system failure messages.
1.8.2 Operational event indications
When an operational event occurs, the Main Alarm Panel shows the related message
in red, yellow or white in the help area.
* RESET key not pressed or equipment on bridge is not operated.
1.9 How to Make an Emergency Call
The purpose of an emergency call is to immediately start the watch timer from the 2nd
stage. (This feature is disabled if the watch alarm is already in the 2nd or 3rd stage.)
Press the EMG key to start the emergency call.
Indication Problem Color State
Failure: Communication Communication failure be-
tween Processor Unit and
Main Alarm Panel
Red Flashing
Failure: AC AC power failure Red Flashing
Failure: DC DC power failure Red Flashing
Indication Event Color
MANUAL OFF Manual Off mode selected. White
Autopilot OFF Auto mode selected, Autopilot signal
off.
White
PREWARNING WATCH ALARM
Push any key.
Presence on bridge* not confirmed in
dormant period.
Yellow
WATCH ALARM(1st Stage)Push any
key.
Presence on bridge* not confirmed at
prewarning phase.
Red
WATCH ALARM(2nd Stage)Push
[RESET] key to stop buzzer.
Presence on bridge* not confirmed at
1st stage.
Red
WATCH ALARM(3rd Stage)Push
[RESET] key to stop buzzer.
Presence on bridge* not confirmed at
2nd stage.
Red
WATCH ALARM(2nd Stage: Emer-
gency Call) Push [RESET] key to
stop buzzer.
Emergency call made from Main
Alarm Panel, or backup navigator
signal received.
Red
WATCH ALARM(3rd Stage: Emer-
gency Call) Push [RESET] key to
stop buzzer.
Emergency call made from Main
Alarm Panel, or backup navigator
signal received.
Red
WATCH ALARM(2nd stage:Emergency Call)
Manual ON
Power AC/DC
Push [RESET] key to stop buzzer.