Furuno BR-500 Medical Alarms User Manual


 
1. MAIN ALARM PANEL
1-4
1.5 How to Select the Backup Officer
Press the SEL key at the BNWAS display to select a backup officer. The current se-
lection is underlined.
1.6 Mode
The BR-500 has three main modes of operation:
Manual OFF: The BNWAS is inactive. Use this mode when entering or just leaving
harbor. No reset is necessary. Default setting.Manual ON: The BNWAS is active. Use
this mode when the vessel is travelling on the open sea. Reset is necessary to contin-
ue operation.AUTO: The BNWAS is active or inactive according to the autopilot state.
BNWAS is ON when the autopilot is ON; OFF when the autopilot is OFF.
1. Press the MODE key. You are asked to enter the pass-
word. Enter the password. See the FURUNO service tech-
nician for the password.
2. Use the CursorPad to select a mode then press the ENT/
CALL key.
Power AC/DCPower AC/DC
Current backup
officer selection
is underlined