Filter
Top Products
• Energy Saving IO Firmware Version
Display the energy-saving IO firmware version.
Network Settings
Enables the wired LAN and wireless LAN settings, projector ID registration, and network status to be
verified.
Wired LAN
Specify the wired LAN settings.
• Wired LAN Settings
• Transmission Speed
Select the wired LAN speed.
Select a speed that matches your network environment. It is recommended that [Auto-
Negotiation] be selected.
Default: [Auto-Negotiation]
• Auto-Negotiation
• 10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex
• MAC Address
Display the projector's MAC address.
• TCP/IP Settings
• DHCP
Select whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when [Enable] is
selected. When [Disable] is selected, enter the IP address, subnet mask, and default
gateway manually.
Default: [Enable]
• Enable
• Disable
• IP Address
Enter the projector's IP address.
Default: 0.0.0.0
4. Changing the Projector Settings
96