Filter
Top Products
• 4
• Network Key
Enter the WEP key when you select [WEP Shared Key] or [Open System] in
[Authentication Method] and select [WEP] in [Encryption Method].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5
characters for ASCII. When using 128 bit WEP, up to 26 characters can be used for
hexadecimal and up to 13 characters for ASCII.
Enter PSK when [WPA-PSK] or [WPA2-PSK] is selected in [Authentication Method].
When using a PSK, up to 64 characters can be used for hexadecimal and 8 to 63
characters for ASCII.
• TCP/IP Settings
• DHCP
Select whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when [Enable] is
selected. If you select [Disable], manually enter the IP address, subnet mask, and default
gateway.
Default: [Enable]
• Enable
• Disable
• IP Address
Enter the projector's IP address.
Default: 0.0.0.0
• Subnet Mask
Enter the subnet mask.
Default: 0.0.0.0
• Default Gateway
Enter the default gateway.
Default: 0.0.0.0
• Reset Wireless LAN Settings
• Reset Wireless LAN Settings
Restore all the wireless LAN settings to their defaults.
LAN Common
Specify the wired LAN and wireless LAN settings.
• Network Interface
• Network Interface
Network/USB Settings Menu
99