Filter
Top Products
1. Press the [USB] button.
CLB044
The input signal switches to the USB, and the files within the root directory are displayed.
2. Use the [ ] and [ ] buttons to select the MPEG file or folder.
3. Press the [Enter] button.
If you select an MPEG file, the video plays. If you select a folder, the file list within the folder is
displayed. Repeat steps 2 and 3 until you can display the file you want to project.
• You can also control the projected videos from the control panel on the projector.
• The rewind and fast forward speed increases three levels each time the button is pressed. To
reduce the speed to its original, pause the video by pressing the [Enter] button, and then press it
again to restart the video.
Disconnecting the USB Device
1. Press the [Menu] button while the video is being projected.
2. Select [Remove Device] on the [USB File Projection] screen.
The confirmation screen is displayed.
3. Select [OK].
4. Disconnect the USB device.
• A USB device can be disconnected by selecting [Remove Device] in [USB Settings].
Converting Presentation Files to JPEG Files
Microsoft PowerPoint presentation files can be converted to JPEG files, which are compatible with the
projector.
Projecting Images from a USB Memory Device or Digital Camera
49