Filter
Top Products
Model 3095 mDSL DACS Getting Started Guide
8
you must notify the telephone company prior to disconnection. The following information may be required
when applying to your local telephone company for leased line facilities. The Universal Service Order Code
(USOC) is RJ48. The Facility Interface Codes (FIC) are 04DU9-BN, 04DU9-DN, 04DU9-1KN, and
04DU9-1SN. The Service Order Code (SOC) is 6.0N.
FCC Part 68 Compliance Statement
This equipment complies with Part 68 of FCC Rules. Please note the following:
1.
You are required to request service from the telephone company before you connect the DACS to a net-
work. When you request service, you must provide the telephone company with the following data. When
you request T1 Service, you must provide the telephone company with the Facility Interface Code. Provide
the telephone company with both of the following codes: 04DU9-B (1.544 MB D4 framing format) and
04DU9-C (1.544 MB ESF format). The telephone company will select the code it has available. The Ser-
vice Order Code(s) (SOC): 6.0N. The required Universal Service Order Code (USOC) jack: RJ 48C. The
make, model number, and FCC Registration number of the DACS.
2.
Your telephone company may make changes to its facilities, equipment, operations, or procedures that
could affect the proper functioning of your equipment. The telephone company will notify you in advance
of such changes to give you and opportunity to maintain uninterrupted telephone service.
3.
If your DACS causes harm to the telephone network, the telephone company may temporarily discon-
tinue your service. If possible, they will notify you in advance, but if advance notice is not practical, you
will be notified as soon as possible and will be informed of your right to file a complaint with the FCC.
4.
If you experience trouble with the DACS, please contact Patton Electronics, Co. for service or repairs.
Repairs should be performed only by Patton Electronics Co.
5.
You are required to notify the telephone company when you disconnect the DACS from the network.
CE Notice
The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromag-
netic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A
Certificate of Compliance is available by contacting Technical Support.
Service
Facility
Interface Code
Service
Code
Network
Connection
1.544 Mbps SF format without line power
04DU9-BN 6.0N RJ-48C
1.544 Mbps SF and B8ZS without line power 04DU9-DN 6.0N RJ-48C
1.544 Mbps ANSI ESF without line power 04DU9-1KN 6.0N RJ-48C
1.544 Mbps ANSI ESF and B8ZS without line power 04DU9-1SN 6.0N RJ-48C