Filter
Top Products
Maintenance 61
Model 3095 mDSL DACS Getting Started Guide 5 • Troubleshooting and maintenance
2. Connect the RJ45-RJ45 cable between the adapter you installed in step 1 and the RS-232 Config port on
the rear of the Model 3095.
Setting up the HyperTerminal (or similar program) session
Do the following:
1. Open a HyperTerminal session by double-clicking on HYPERTRM.EXE.
Figure 33. Connection Description window
2. Type a connection name (for example, 3095 Config), select an icon, then click OK (see figure 33).
Figure 34. Connect To window
3. On the Connect To window (see figure 34), set Connect using: to one of the options named Direct to ComX
(where the "X" refers to the number identifying the RS-232 serial port on the PC). In the following proce-
dure, Com1 will be the used as the port identifier.
4. Click on
OK.
5. The COM1 Properties window displays.