Filter
Top Products
Completing the hardware installation 29
Model 3095 mDSL DACS Getting Started Guide 2 • Hardware installation
1. Connect the equipment to a 40–72 VDC, 2.5A supply source that is electrically isolated from the AC
source. The 40–72 VDC source is to be reliably connected to earth.
2. Verify that the green POWER LED is lit. If the POWER LED is flashing green, refer to Chapter 5, “Trou-
bleshooting and maintenance”.
Hardware installation is complete. Refer to Chapter 3, “Configuring the DACS for operation”.