Filter
Top Products
Using a Web browser to complete Model 3095 configuration 41
Model 3095 mDSL DACS Getting Started Guide 3 • Configuring the DACS for operation
Examples on configuring static connections.
Example 1
Connect mDSL modem, Port 3 (referring to modem #3), time slots 1 - 31, to an E1 line on (WAN) Port 1,
time slots 1 - 31.
Solution: Complete the following steps.
1. Under "Dev Type A," select mDSL(3).
2. Under "Dev Num A," select port3(3).
3. Under "Dev Slots A," enter 1 - 31.
4. Under "Dev Type B," select t1-e1(1).
5. Under "Dev Num B," select port1(1).
6. Under "Dev Slots B," enter 1 - 31.
7. Click on the
"Submit Query" button located to the right of the static connection entry you just com-
pleted.
Note At this point the DS0 channel mapping is completed. Now we need
to configure the DTE data rate of the mDSL modem.
8. Click on mDSL on the
3095 Configuration Menu.
9. On the
Configuration/information pane, click on the number "3" under the column titled "Port."
10. Change the
Configuration State
pull-down menu to
modifyConfiguration(1)
and click on Submit Query.
11. Click on the
Modify Configuration hyperlink.
12. At the bottom of the pane, change
DTE Rate
to
dteRate1984(35)
and click Submit Query. You will auto-
matically return to the
mDSL Port Information Page.
13. From the pull-down menu of
Configuration State
, select
onLine(0)
and click Submit Query.
14. You have now completed the entire configuration for this example.
Example 2
Connect an E1 line, (WAN) Port 2, timeslots 1 - 31, to another E1 line, (WAN) Port 3, timeslots 1 - 31.
Solution: Complete the following steps.
1. Under "Dev Type A," select t1-e1(1).
2. Under "Dev Num A," select port2(2).
3. Under "Dev Slots A," enter 1 - 31.
4. Under "Dev Type B," select t1-e1(1).
5. Under "Dev Num B," select port3(3).
6. Under "Dev Slots B," enter 1 - 31.