Filter
Top Products
3 • Configuring the DACS for operation Model 3095 mDSL DACS Getting Started Guide
40 Using a Web browser to complete Model 3095 configuration
two mDSL modems, or (3) between WAN time slots. Without defining the mapping, the modems have no
destination; similarly with the WAN ports. The DACS functions like a 2-dimensional matrix switch.
Do the following to set the DS0 Mapping of the mDSL modems:
1. Click on
DS0 Mapping on the Configuration Menu.
2. Set the
DS0 Display Type
(see figure 21) to
displayLongForm(0)
. To create each static connection (which
is the DS0 Mapping Process), you will select from the following parameters:
3.
Device Type. This setting specifies the physical interface onto which you will be connecting. Within the
Model 3095, the user has the option of selecting either a T1/E1 WAN line or an mDSL modem. The two
Device Types' choices are
t1-e1(1)
and
mDSL(2)
.
Figure 21. DS0 Mapping Configuration window
4. Device Number. The next step in creating a connection through the DACS is to select the port that you
would like to use. This corresponds to the Port Number for the devices selected previously. For example, if
you would like to make a connection to mDSL port 3 (referring to mDSL modem #3), then select
port3(3)
in the Device Number field.
5.
Device Slots. This parameter identifies which DS0 channels-each DS0 channel is 64 kbps-that you would
like to connect. Each mDSL has 32 DS0 channels for data and each time slot in a T1 or an E1 WAN port
has 24 or 31 DS0 channels, respectively. When selecting the slots you must select the same number of
Device Slots on the "A" and "B" sides of the connection. The slots are selected by entering a string that
represents the slots. For the mDSL ports, the slots that are available are 1 - 32. For a WAN port configured
as a T1, the available slots are numbered from 1 - 24. For a WAN port configured as an E1, the available
slots are 1 - 31. The following notation should be used for entering the slots.
6. dash: (-), e.g., 1 - 4
7. comma: (,), e.g., 1,4,9
8. combo: 1-2,3,6-7
9. "A" and "B" identify the two ends of the static connection.