Filter
Top Products
Maintenance 63
Model 3095 mDSL DACS Getting Started Guide 5 • Troubleshooting and maintenance
9. Connect the male end of the 3095 DACS power cables to the power outlets.
10. On your HyperTerminal connection window, boot up information will display, eventually followed by a
login request window resembling that shown in figure 37.
Figure 37. Login window
11. For the user name, type superuser.
12. For the password, type superuser; the
TOP LEVEL MANAGEMENT window then appears (see
figure 38).
Figure 38. VT-100 Top Level Management window
13. Type k for System, then press <Enter>.
14. Under System, type 1 for Details, then press
<Enter>.
15. Enter g for LAN Address, then press
<Enter>.
16. Type your LAN IP address followed by pressing
<Enter>.
17. Press the left-arrow cursor key on your keyboard to return to the previous screen.
18. If you do not need to change the LAN Mask from the default of 255.255.255.0, go to step 21. Otherwise,
press h and type the new LAN Mask in the same manner as when entering a LAN IP address.
19. Press the left-arrow cursor key until the TOP LEVEL MANAGEMENT window displays.