Filter
Top Products
Initial Configuration through the RS-232 Control Port 35
Model 3095 mDSL DACS Getting Started Guide 3 • Configuring the DACS for operation
8. Configure the settings for Function, arrow and ctrl keys act as to Terminal keys as shown in figure 15, then
click
OK.
Figure 15. Terminal keys configuration
9. Connect the male end of the 3095 DACS’ power cables to the power outlets.
10. On your HyperTerminal connection window, boot up information will display, eventually followed by a
login request window resembling that shown in figure 16.
Figure 16. Login window
11. For the user name, type superuser.
12. For the password, type superuser; the
TOP LEVEL MANAGEMENT window then appears (see
figure 17).