Mitsubishi Electronics MR-MC241 Sleep Apnea Machine User Manual


 
App. - 72
APPENDIX
Monitor No. Content Units Remarks
0580
Servo parameter change number
No. 0100 to 010F
Bit corresponding to parameter number is turned on.
bit is No. 0100 (bit 0) to 010F (bit 15).
0581
Servo parameter change number
No. 0110 to 011F
Bit corresponding to parameter number is turned on.
bit is No. 0110 (bit 0) to 011F (bit 15).
0582
Servo parameter change number
No. 0120 to 012F
Bit corresponding to parameter number is turned on.
bit is No. 0120 (bit 0) to 012F (bit 15).
0583
Servo parameter change number
No. 0130 to 013F
Bit corresponding to parameter number is turned on.
bit is No. 0130 (bit 0) to 013F (bit 15).
0584
Servo parameter change number
No. 0140 to 014F
Bit corresponding to parameter number is turned on.
bit is No. 0140 (bit 0) to 014F (bit 15).
0585
Servo parameter change number
No. 0150 to 015F
Bit corresponding to parameter number is turned on.
bit is No. 0150 (bit 0) to 015F (bit 15).
0586
Servo parameter change number
No. 0160 to 016F
Bit corresponding to parameter number is turned on.
bit is No. 0160 (bit 0) to 016F (bit 15).
0587
Servo parameter change number
No. 0170 to 017F
Bit corresponding to parameter number is turned on.
bit is No. 0170 (bit 0) to 017F (bit 15).
0588
Servo parameter change number
No. 0180 to 018F
Bit corresponding to parameter number is turned on.
bit is No. 0180 (bit 0) to 018F (bit 15).
0589
Servo parameter change number
No. 0190 to 019F
Bit corresponding to parameter number is turned on.
bit is No. 0190 (bit 0) to 019F (bit 15).
058A
Servo parameter change number
No. 01A0 to 01AF
Bit corresponding to parameter number is turned on.
bit is No. 01A0 (bit 0) to 01AF (bit 15).
058B
Servo parameter change number
No. 01B0 to 01BF
Bit corresponding to parameter number is turned on.
bit is No. 01B0 (bit 0) to 01BF (bit 15).
058C
Servo parameter change number
No. 01C0 to 01CF
Bit corresponding to parameter number is turned on.
bit is No. 01C0 (bit 0) to 01CF (bit 15).
058D
Servo parameter change number
No. 01D0 to 01DF
Bit corresponding to parameter number is turned on.
bit is No. 01D0 (bit 0) to 01DF (bit 15).
058E
Servo parameter change number
No. 01E0 to 01EF
Bit corresponding to parameter number is turned on.
bit is No. 01E0 (bit 0) to 01EF (bit 15).
058F
Servo parameter change number
No. 01F0 to 01FF
Bit corresponding to parameter number is turned on.
bit is No. 01F0 (bit 0) to 01FF (bit 15).