Mitsubishi Electronics MR-MC241 Sleep Apnea Machine User Manual


 
12 - 19
12. MONITOR NUMBER
Monitor No. Content Units Remarks
05B0
Servo parameter change number
No. 1300 to 130F
Bit corresponding to parameter number is turned on.
bit is No. 1300 (bit 0) to 130F (bit 15).
05B1
Servo parameter change number
No. 1310 to 131F
Bit corresponding to parameter number is turned on.
bit is No. 1310 (bit 0) to 131F (bit 15).
05B2
Servo parameter change number
No. 1320 to 132F
Bit corresponding to parameter number is turned on.
bit is No. 1320 (bit 0) to 132F (bit 15).
05B3
Servo parameter change number
No. 1330 to 133F
Bit corresponding to parameter number is turned on.
bit is No. 1330 (bit 0) to 133F (bit 15).
05B4
Servo parameter change number
No. 1340 to 134F
Bit corresponding to parameter number is turned on.
bit is No. 1340 (bit 0) to 134F (bit 15).
05B5
Servo parameter change number
No. 1350 to 135F
Bit corresponding to parameter number is turned on.
bit is No. 1350 (bit 0) to 135F (bit 15).
05B6
Servo parameter change number
No. 1360 to 136F
Bit corresponding to parameter number is turned on.
bit is No. 1360 (bit 0) to 136F (bit 15).
05B7
Servo parameter change number
No. 1370 to 137F
Bit corresponding to parameter number is turned on.
bit is No. 1370 (bit 0) to 137F (bit 15).
05B8
:
Reserved
05CF