Filter
Top Products
11 - 26
11. PARAMETERS
Parameter
No.
Symbol Name
Initial
Value
Units
Setting
range
Function
When tandem
drive is being
used
0219 *SOP Sensor input
options
0000h 0000h
to 0304h
0
Sensor input method
0: Unavailable
1: Driver input
2: Digital input
3: Not connected (does not detect
LSP, LSN, DOG)
4: Dual port memory input
0
Limit switch signal selection
0: LSP/LSN are valid
1: LSP is valid, LSN is invalid
2: LSP is invalid, LSN is valid
3: LSP/LSN are invalid
Each axis
021A *SLSP Sensor
signal (LSP)
connection
specification
0000h
0000 to
3FF1h
Digital input assignment
Set valid/invalid for the digital input
assignment where LSP is
connected.
0: Not assigned
1: Assigned
Digital input number assignment
Set the digital input number where
LSP is connected.
000h to 3FFh: DI_000 to DI_3FF
Each axis
021B *SLSN Sensor
signal (LSN)
connection
specification
0000h 0000 to
3FF1h
Digital input assignment
Set valid/invalid for the digital input
assignment where LSN is
connected.
0: Not assigned
1: Assigned
Digital input number assignment
Set the digital input number where
LSN is connected.
000h to 3FFh: DI_000 to DI_3FF
Each axis
021C *SDOG Sensor
signal (DOG)
connection
specification
0000h 0000 to
3FF1h
Digital input assignment
Set valid/invalid for the digital input
assignment where DOG is
connected.
0: Not assigned
1: Assigned
Digital input number assignment
Set the digital input number where
DOG is connected.
000h to 3FFh: DI_000 to DI_3FF
Each axis
021D *VEND Vendor ID 0000h 0000h
to FFFFh
Set the vendor ID. (SSCNET /H communication)
0000: Mitsubishi Electric
Same value
021E *CODE Type code 0100h 0000h
to FFFFh
Sets the type code.
1000: MR-J4(W
)- B
Same value
021F For
manufacturer
setting
0