Mitsubishi Electronics MR-MC241 Sleep Apnea Machine User Manual


 
1 - 22
1. SUMMARY
1.6 SSCNET
cables
Connect the position board and servo amplifiers, or servo amplifier and servo amplifier by SSCNET
cable.
When using MR-MC210/MR-MC240, the SSCNET
cable for connecting servo amplifiers can be used for one
line only. When using MR-MC211/MR-MC241, the SSCNET
cable for connecting servo amplifiers can be
used for up to two lines (use 1CH and 2CH). Up to 32 servo amplifiers can be connected.
(1) SSCNET
cable specifications
Model name Cable length [m(ft.)] Description
MR-J3BUS M
MR-J3BUS015M 0.15 (0.49)
• Position board
Servo amplifier
• Servo amplifier
Servo amplifier
MR-J3BUS03M 0.3 (0.98)
MR-J3BUS05M 0.5 (1.64)
MR-J3BUS1M 1 (3.28)
MR-J3BUS3M 3 (9.84)
MR-J3BUS M-A
MR-J3BUS5M-A 5 (16.40)
MR-J3BUS10M-A 10 (32.81)
MR-J3BUS20M-A 20 (65.62)
MR-J3BUS M-B
MR-J3BUS30M-B 30 (98.43)
MR-J3BUS40M-B 40 (131.23)
MR-J3BUS50M-B 50 (164.04)
(2) Connection between the position board and servo amplifiers
Connect the SSCNET
cables to the following connectors.
Refer to Section 3.2.1 for the connection and disconnection of SSCNET
cable.
1CH
2CH
(Note)
Servo amplifier Servo amplifier
Servo amplifier Servo amplifier
CN1A
CN1B
CN1A
CN1B
CN1A
CN1B
CN1A
CN1B
Cap
Cap
Note. It cannot communicate if the connection of
CN1A and CN1B is mistaken.
SSCNET cable length
MR-J3BUS M use
1) 3m(9.84ft.)
MR-J3BUS M-A use
1) 20m(65.62ft.)
MR-J3BUS M-B use
1) 50m(164.04ft.)
Attach a cap to
connectors of
channel not being
used.
1)
1)
1)
1)
Position board
(Note) MR-MC211/
MR-MC241 only
SSCNET /H Line 2
SSCNET /H Line 1