Filter
Top Products
92 LogTag Analyzer
Menu commands
The menu system has been separated into groups of related commands. Each of these
menu groups is explained in more depth in the subsequent sections. The software will
only display the menu groups and commands within each menu group that are
appropriate depending on what you are currently doing with the software.
You may also see that some of the menu commands have a reference after the command
name, for example F2 or Ctrl+O. These represent key strokes on the keyboard that
instruct the software to perform the appropriate command, without out the need to select
the menu or toolbar command. When only one key reference is mentioned, for example
"F2", then pressing that single key on the keyboard will cause the appropriate command
to be performed. If there is more than one key reference mentioned, for example Ctrl+O,
then to cause the command to be performed you must press and hold down the first key
mentioned while pressing the other key once. When letters are used in the key reference,
for example Ctrl+O, it does not matter whether or not the caps lock is on or off.
In This Section
File Menu...............................................................93
Edit Menu ..............................................................95
LogTag Menu.........................................................97
Window Menu........................................................98
Help Menu .............................................................99