Filter
Top Products
40 LogTag Analyzer
In the first instance, the alert criterion is NOT met because the total out-of-range events
equals 2 + 2 + 2 = 6. The alert condition is 7 total, so the alert does not go off.
In the second instance, the alert criterion is met because the total out-of-range events
equals 4 + 4 = 8. The alert condition is 7 total, so the alert DOES go off.
In the third instance, the alert criterion is NOT met because the total out-of-range events
equals 4 + 2 = 6. The alert condition is 7 total, so the alert does not go off.
Matching these to known conditions of interest in your monitoring program may require
some information about the effects of exposure to different durations of out-of-range
humidity and/or temperatures.
If the battery within the LogTag is detected to be low and therefore not recommended for
further use, the software will display a warning to you in the top right corner, like the
following example.
Verify Access Password
When configuring a LogTag for its next use, if the user enables the "
Configure requires
a password
" option and/or changes the password to restrict access to the LogTag, then
the user is required to verify the password to be defined before it will be stored in the
LogTag. The window that will appear to verify the password will be similar to the
following picture.