Filter
Top Products
Chapter 4 Preparing LogTags for use 43
Getting the best from your
LogTag
Many users of humidity and/or temperature loggers are used to attaching the logger to a
hook or tie-wrapping them to a monitored object. A wide variety of attachment methods
can be used with the hole on upper right hand corner of the LogTag, such as bolting the
LogTag in position, attaching it to a packaging strap, using a car-seal for security or other
means.
The hole is quite strong, so most means of attachment will not compromise the structural
integrity of the LogTag. We do, however, recommend that the dead weight stress on the
hole itself not exceed 5 pounds (2 Kg).
The sensor for the LogTag is also very responsive, so we recommend you position the
LogTag in a location, where it will not be susceptible to changes in temperature due to
operational activities. For example, it is not recommended you place a LogTag beside a
door way, as every time someone passes through the door, the LogTag will register the
change of environmental temperature due to the breeze that will be generated by the
person, which does not necessarily reflect the overall temperature of the environment
been monitored.