Filter
Top Products
Chapter 2 Installing the software 15
The installation process
To install the LogTag Analyzer software, first you need to locate the installation file that
was downloaded from the LogTag Recorders Internet site. To begin the installation
process open the installation file, which is typically performed by double clicking the left
mouse button.
Tip: Double clicking a mouse button, implies the user clicks the same mouse button in
quick succession.
The installation process will guide you through the relevant steps to correctly and
successfully install the software. If you have installed any other software, you should find
the installation process familiar. To proceed through each step of the installation process,
click the "Next" button. If you want to change a previous step you can click the "Back"
button. When the process is ready to be completed, clicking the "Finish" button, when it
appears, will finish the installation process. If you want to stop installing the software,
click the "Cancel" button.
We recommend you leave all options to their default setting, especially if you are unsure
of what option to select or what the actual implications are if the option was to be
changed.
During the installation process, a window similar to the following picture may appear. This
is part of the process of installing the driver for the USB Interface. Clicking on the
"Continue Anyway" button will allow the driver to be successfully installed. The chapter
"
Resolving USB Driver Problems
", included later in this guide will guide you through
the necessary steps to successfully install the driver for the USB Interface if the "STOP
Installation" button was clicked.