Filter
Top Products
Chapter 3 Quick Start Guide 21
Using the LogTag with the
Interface
The LogTag fits into the Interface Cradle just like a putting a piece of bread into a toaster.
As shown in the following picture, the LogTag faces towards the front label of the
Interface Cradle with the contacts on the reverse side. If you look into the Interface
Cradle slot, you will be able to see where the contacts connect with the matching contacts
in the Interface Cradle.
When placing the LogTag into the Interface Cradle slot, you should be able to feel a very
slight resistance as the contacts "grab" the LogTag. This is normal. Removal of the
LogTag will cause a slight clicking noise as the contacts snap back into their "unloaded
position".
If the LogTag has readings stored within its memory, the software will automatically start
to download the data and will also display an animated picture during the download
process, similar to the following picture.